Winterising your boat in the Gulf of Saint-Tropez: the complete guide
Every year, as autumn approaches, boat owners in the Gulf of Saint-Tropez ask themselves the same question: how do you prepare your boat for winter in the best possible conditions? Between the mistral sweeping across the bay, the sea humidity and the long weeks without sailing, a well-run winterisation is the best insurance for finding your boat ready to go as soon as the fine weather returns. Here is our complete guide, designed for the specific conditions of the Gulf of Saint-Tropez.
Why winterisation matters so much in the Gulf of Saint-Tropez
The Gulf of Saint-Tropez enjoys a mild Mediterranean climate, but it is not spared by bursts of mistral and the heavy autumn rains. Sea air, laden with salt and moisture, speeds up the corrosion of metal parts, the oxidation of electrical circuits and the growth of mould on board. A boat left unattended from November to March can suffer damage far more costly to repair than the time spent on a careful winterisation.
The right time to winterise your boat
In our region, the ideal period for winterising is between late October and mid-November, once the last autumn outings are over and before the first winter storms. The boatyards of the gulf, from Cogolin to Port Grimaud by way of Sainte-Maxime and Saint-Tropez, are in high demand at this time: it is therefore advisable to book your dry storage space or haul-out several weeks in advance.
Cleaning and protecting the hull
First of all, the hull should be thoroughly pressure-washed to remove the salt, algae and dirt built up over the season. It is also the perfect time to inspect the underwater hull for blisters, cracks or signs of osmosis, and to have antifouling reapplied if needed before you head back out. Boats stored ashore should be set on a suitable cradle, with support points that do not weaken the structure during the months out of the water.
The engine: the checklist not to overlook
The engine is probably the most sensitive part of winterisation. Change the engine oil and filter, replace the fuel filter, and run the engine for a few minutes with the new oil to spread it properly. For outboard and inboard engines cooled by seawater, a full flush of the cooling circuit with fresh water is essential to remove the salt which, if left in place, encourages corrosion of the pipes and the heat exchanger. On petrol engines, it is also advisable to add a fuel stabiliser to prevent the fuel from degrading over the winter.
Water systems, tanks and toilets
In the Gulf of Saint-Tropez, sub-zero temperatures are rare but not impossible on some winter nights. It is therefore wise to drain the fresh-water systems, the water heater and the marine toilets, then fill them with a non-toxic marine antifreeze to protect the pipes from any frost. Black and grey water tanks should also be emptied and cleaned to avoid bad smells and bacteria growth during the winter.
Deck, rigging and deck hardware
On deck, remember to take down the sails, have them cleaned and checked by a sailmaker, and store the ropes away from moisture. The standing rigging deserves a careful inspection: turnbuckles, shrouds and masthead fittings are all potential corrosion points. Grease the winches, cleats and metal joints, and protect chrome parts with a water-repellent product to limit salt marks and oxidation.
Interior, electronics and batteries
Inside, air the boat out thoroughly before closing it up for winter and fit moisture absorbers to limit condensation and mould, which are common in closed cabins in the gulf during the damp months. Disconnect and remove the batteries if possible, storing them somewhere dry and recharging them regularly over the winter to preserve their capacity. Also remember to switch off the main power supply and protect sensitive electronic equipment with suitable covers.
Ashore or afloat: which to choose in the gulf?
Boat owners in the Gulf of Saint-Tropez can choose between winter storage ashore, on a cradle or trailer in a boatyard or boat park, and winter storage afloat, at a berth in one of the gulf’s harbours. Storage ashore better protects the hull from fouling and makes antifouling work easier, but it involves transport and handling. Storage afloat is simpler but requires closer monitoring of mooring lines, fenders and bilge pumps, especially during the westerly gales that are common in the bay in winter.
In summary
Successful winterisation in the Gulf of Saint-Tropez comes down to a few essential steps: cleaning the hull, a full engine service, protecting the water systems, caring for the rigging and deck hardware, and managing humidity on board carefully. By entrusting these jobs to local professionals or following this checklist methodically, you can head into winter with peace of mind and find your boat ready to go back to sea with the first fine days of spring.



